844-4-HYDROSEED (844.449.3767)
844-4-HYDROSEED (844.449.3767)
1½" NPT Threads
Brass Straight Stream
GPM: 100
Pattern: 1/2" Round
Angle: Round Stream
Typical Use: Maximum Distance
00700 Nozzle Assy
GPM: 200
Pattern: 5/8" Round
Angle: Round Stream
Typical Use: Maximum Distance
Hex 1500 Hydro Sprig
GPM: 200
Pattern: Hydro Sprigging
Typical Use: Hydro Sprigging
50200 Nozzle Assy
GPM: 20
Pattern: V Spray
Angle: 50°
Typical Use: Very Very Fine Spray (Hose)
65300 Nozzle Assy
GPM: 30
Pattern: V Spray
Angle: 65°
Typical Use: Very Fine Spray (Hose)
40015 Nozzle Assy
GPM: 40
Pattern: V Spray
Angle: 15°
Typical Use: Very Fine Spray (Hose)
40030 Nozzle Assy
GPM: 40
Pattern: V Spray
Angle: 30°
Typical Use: Very Fine Spray (Hose or Tower)
65400 Nozzle Assy
GPM: 40
Pattern: V Spray
Angle: 65°
Typical Use: Very Fine Spray (Hose)
50015 Nozzle Assy
GPM: 50
Pattern: V Spray
Angle: 15°
Typical Use: Tower & Hose
25500 Nozzle Assy
GPM: 50
Pattern: V Spray
Angle: 25°
Typical Use: Tower & Hose
50030 Nozzle Assy
GPM: 50
Pattern: V Spray
Angle: 30°
Typical Use: Tower & Hose
50050 Nozzle Assy
GPM: 50
Pattern: V Spray
Angle: 50°
Typical Use: Tower & Hose
50500 Nozzle Assy
GPM: 50
Pattern: V Spray
Angle: 50°
Typical Use: Hose
75015 Nozzle Assy
GPM: 75
Pattern: V Spray
Angle: 15°
Typical Use: Tower & Hose
25750 Nozzle Assy
GPM: 75
Pattern: V Spray
Angle: 25°
Typical Use: Tower & Hose
75030 Nozzle Assy
GPM: 75
Pattern: V Spray
Angle: 30°
Typical Use: Tower & Hose
75050 Nozzle Assy
GPM: 75
Pattern: V Spray
Angle: 50°
Typical Use: Tower & Hose
151000 Nozzle Assy
GPM: 100
Pattern: V Spray
Angle: 15°
Typical Use: Tower
115015 Nozzle Assy
GPM: 150
Pattern: V Spray
Angle: 15°
Typical Use: Tower
150015 Nozzle Assy
GPM: 200
Pattern: V Spray
Angle: 15°
Typical Use: Tower
150030 Nozzle Assy
GPM: 200
Pattern: V Spray
Angle: 30°
Typical Use: Tower
501500 Nozzle Assy
GPM: 200
Pattern: V Spray
Angle: 50°
Typical Use: Tower
502000 Nozzle Assy
GPM:
Pattern: Hydro Sprigging
Angle: 50°
Typical Use: Hydro Sprigging (Tower)
Note: The descriptions and definitions listed above are only general guidelines. Different nozzles are used by different contractors for different uses.
It is Important to not run the engine or pump to an extreme pressure. Such practice can and will wear out various components on the machine including the engine.