844-4-HYDROSEED (844.449.3767)
844-4-HYDROSEED (844.449.3767)
The TurfMaker® Model 325 hydroseeder with mechanical agitation and gear pump is a cost effective alternative to jet agitation machines. Typically, jet agitation hydroseeders are limited to soupy slurries of paper mulch. Soupy paper mulch applications washout easily with rain and frequently yield spotty seed germination. Poor grass growing results make unhappy customers. The TurfMaker® 325 easily mixes and pumps thicker wood mulch slurries associated with Sod Quality Results™ and happy satisfied customers.
The TurfMaker® 325 fully loaded weighs less than 4,000 pounds and is designed to fit in the back of a standard bed pick-up truck. Getting in and out of tight areas is quick and easy.
The most significant option is the self-filling and clear water hose flushing system.
A 550 gallon plastic tank on a trailer provides an on-board water source for two additional tank loads of application. This combination is capable of three tank loads of application with one trip to the water source. This is almost equal to a 975 gallon machine. A quality mulch application can be completed on a typical home lawn in about an hour.
Jet agitation machine buyers have wasted time on the job, time in their career, and performed poor grass planting services for their clientele, just because they did not know what it takes to produce good results with the hydroseeding process. Spraying colored water is not good business. Providing grass planting services with appropriate applications of quality mulch will produce Sod Quality Results™ nearly every time. This good service results in satisfied customers and good future referral business.
Total Capacity – Total Gallons: 325
Empty Weight: (Varies Depending on Options) 1,400 lbs
Weight of Slurry in Tank: 2,700 lbs
Loaded Weight: (Varies Depending on Options) 4,100 lbs
Typical Length with Most Engines: 80″ – 85″
Skid Frame Width: 47″
Overall Width: 56″
Overall Height: 55″
Standard Engine: Honda GX 270.
(Other Engines Available)
Standard Pump: Rotary Gear, Positive Displacement
Trailer Option: Single Axle (5,200 lbs axle)
Total Pounds of Mulch per Tank Load**
Pumping Power – Spraying Distances
Length of Hose: up to 300 ft.
Larger Engine Options: up to 1,000 ft.
(Long distance applications depend on larger engines to get the most distance from the end of the nozzle.)
Distance from the end of the nozzle: Up to 150 spray
** Mulches can be loaded more or less depending upon brand and density.
TurfMaker® 325
The base configuration TurfMaker® 325 will mix and pump any mulch product (including BFMs/HPMs) up to 125 pounds per tank load and pump that thick slurry through at least 200 feet of hose. Typical thickness slurries can be pumped through longer hoses. Load and mix time estimated at 5 minutes.
Don't delay, order today 844-449-3767